Bench 03 · 3D printing
Supershapes, vessels and cutters — straight out to a watertight STL.
Cross-section — superformula
Meridian — supershape only
Profile — waist to lip
Drainage holes
Lattice & perforations
Cutter
Stamp
Pod
Flutes — ribs running up
Waves — rings running round
Organic
Print-honest by design. There's no bend or lean here — both tip the walls past the point a printer can bridge them. Twist, flutes and waves all keep the walls climbing.
Wall thickness is nominal. Set your slicer's wall count from the number here — for a 0.4 nozzle, 2.4 mm is six perimeters. Vases print beautifully in spiral/vase mode: set the wall to one perimeter and let the slicer do the hollowing.